2024 Guide to Mounting a Hi-Lift Jack on a Jeep: Find the Best Jack Mount for Jeep

This article aims to guide you and give you ideas on mounting a Hi-Lift Jack on a Jeep, we will also recommend some of the best Jack mount for Jeep, a Hi-Lift Jeep Jack is an essential Jeep recovery gear that you should have when it comes to Jeep off-roading, Overlanding and Camping. We have a Hi-Lift Jack buying guide, after making a purchase, you will need to mount it on your Jeep and this is where this guide comes into play.

This is the ultimate guide to Mounting a Hi-Lift Jack on a Jeep that will cover all the equipment you will need to mount a Hi-Lift Jack on your Jeep with different Hi-Lift mounting options, the installation process, and considerations.

Our Top Picks: Best Hi-Lift Jack Mount For Your Jeep

In this article we will review 5 high lift Jack mounts for your Jeep, these are the top Hi-Lift Jack brackets that will securely attach your Hi-Lift Jack to your Jeep hood, front and rear bumper, tailgate, inside the Jeep bed, roll cages/bull bar, and roof racks. If you are in a hurry, here are our top picks:

Best Hi-Lift Jack Hood Mount for Jeep

Best Front and Rear Bumper Hi-Lift Jack Mount for Jeep

Best Hi-Lift Jack Tailgate Mount for Jeep

Best Hi-Lift Jack Mount for Your Jeep Roll Cage & Bull Bar

Best Driver-Side Hi-Lift Jack Mount for Jeep

Our Top Picks: Hi-Lift Jack Mounting Accessories

Throughout this article, we have listed some Hi-Lift Jack mounting accessories that you might need to enhance the security and protection of your Jeep after mounting it on your Jeep, here are our top picks:

Best Padlock for Locking Your Hi-Lift Jack on Your Jeep

Best Hi-Lift Jack Hood Mount Locking Knob

Best Hi-Lift Jack Handle Keeper

Best Hi-Lift Jack Cover

Where Should a Hi-Lift Jack Be Mounted?

Our comprehensive guide is designed to provide you with various Hi-Lift Jack mounting ideas, such as mounting a Hi-Lift Jack on your Jeep hood, front, and rear bumper, front door, tailgate, inside your Jeep truck bed, Hi-Lift Jack in your Jeep tubes including roll cage/bull bar, and also mounting a Hi-Lift Jack on your Jeeps roof rack.

The hood, front and rear bumper, tailgate, inside the Jeep bed, roll cages/bull bar, and roof racks are the most convenient and easy-to-access Hi-Lift Jack mounting locations on your Jeep, they are also safe places that prevent the Hi-Lift Jack from becoming a hazard in the case of driving on rough roads, with the right Hi-Lift Jack mount a Hi-Lift adds up to the aesthetics and exterior looks of your Jeep when a Hi-Lift Jack is mounted in these locations.

Factors to Consider When Choosing the Best Hi-Lift Jack Mount for Your Jeep.

Now that you know where you can mount the Hi-Lift Jack on your Jeep based on the features of your Jeep, you can pick a Hi-Lift Jack mount that makes sense for you and your Jeep. The most important factors that you can now consider, and the ones that we did consider when buying and testing the Hi-Lift Jack mounts in this article are:

1. Secure mounting: Some Hi-Lift Jack mounts have locks in them, and some don’t, a Hi-Lift Jack is one of the most demanded Jeep recovery tools, and is also one of the most stolen Jeep recovery gear, for these reasons you will need to consider a Jeep Hi-Lift mount to prevent your expensive Hi-Lift Jack from being stolen, a lock also helps secure the Hi-Lift Jack in place when off-roading in rough terrains that cause vibrations to your Jeep body that might detach a loosely mounted Hi-Lift Jack.
2. Heavy duty and Durable construction: We don’t advocate buying Hi-Lift mounts that are made of pure steel because of rust that spreads to the body of your Jeep, we do however recommend stainless steel or aluminum that will not rust, because of the heavy Hi-Lift Jack, you should make sure the mount can withstand wear and tear, rust and corrosion that might be caused by weather elements and constant wear and tear from the heavy Hi-Lift Jack.
3. Ease of access to the Hi-Lift Jack: Based on the location you choose to mount your Hi-Lift Jack, the Hi-Lift mounting kit for your Jeep should allow easy access in case of emergency recovery, it should also allow you to conveniently position the long Hi-Lift Jack without obstructing your view or other accessories mounted on your Jeep, especially for Overlanding Jeeps.
4. Easy installation: Most Hi-Lift Jack mounts are meant to be permanently attached to your Jeep; the Hi-Lift Jack should be easy to install without having to modify your Jeep’s body.

Now that you understand the various mounting locations for your Hi-Lift Jack in your Jeep, and what to look for in a Hi-Lift Jack mount, here are the various Hi-Lift Jack mounts that we recommend.

Best Hi-Lift Jack Mounts for Jeep Reviews

We ordered five Hi-Lift Jack mounts to install on our Jeeps, since most of us use our Jeep for off-roading, Overlanding, and Camping in remote areas, and this is why we need a Hi-Lift Jack for emergency recovery, we needed a solution that will enable us to securely and permanently mount our Hi-Lift Jack without rattling or our Hi-Lift Jack from detaching from the Jeep when off-roading in uneven terrain.

We have organized the Hi-Lift mount kits based on mounting options, ranging from your Jeeps hood, front and rear bumper, front door, tailgate, inside your Jeep truck bed, mounting the Hi-Lift Jack in your Jeeps tubes including roll cage/bull bar, and also some mounting kits that are multi-purpose and can be used on your Jeeps roof rack.

Hi-Lift Jack HM-900 Hood Mount Review

The Hi-Lift Jack HM-900 Hood Mount is the best Jeep high lift Jack mount for mounting a Hi-Lift Jack on the hood of your Jeep Wrangler and Jeep Gladiator, we loved the Hi-Lift Jack HM-900 Hood Mount because of how easy it was to mount on the existing hood hinge holes on our Jeep Gladiator and Jeep Wrangler, it is made of aluminum which means it’s free from rust and corrosion from weather elements.

Best Hi-Lift Jack Hood Mount For Jeep

We do recommend mounting your Hi-Lift Jack with the Hi-Lift Jack HM-900 Hood Mount and letting the base of the Hi-Lift Jack be on the passenger side of the Jeep for less distraction after mounting it on the hood of your Jeep Wrangler or Jeep Gladiator, it will fit most Hi-Lift Jacks with sufficient clearance that will prevent the Hi-Lift Jack from coming into contact with the hood or the Jeep windshield, we also loved the fact that after installing the Hi-Lift Jack HM-900 Hood Mount it didn’t interfere with the windshield washer sprayers.

One disadvantage of the Hi-Lift Jack HM-900 Hood Mount is that it came with plastic knobs, which are okay, but if you will need to properly secure your Hi-Lift Jack you will have to use the Hi-Lift HM-LK Hood Mount Locking Knob that is sold separately and comes with a lock and a pair of keys, this is the recommended locking kit recommended by the Hi-Lift Jack HM-900 Hood Mount company.

Best Hi-Lift Jack Hood Mount Locking Knob

For added functionality of the Hi-Lift Jack HM-900 Hood Mount, you can also purchase Hi-Lift Hood Mount Light Brackets that will allow you to mount both a Hi-Lift Jack and off-roading lights to your Jeeps hood, they are perfect for adding light for off-roading, Overlanding, and camping during the night.

We tried fitting various sizes of Hi-Lift Jack on the Hi-Lift Jack HM-900 Hood Mount, less than 60 inches of Hi-Lift Jacks fit perfectly while 60 inches and above Hi-Lift Jacks did stick out on both sides. This means we would recommend mounting 60 inches and below Hi-Lift Jacks on the hood of your Jeep with this Hi-Lift Jack hood mounts on your Jeep.

Removing the Hi-Lift Jack mounted on the hood of our Jeep was another problem, this is because a Hi-Lift Jack is heavy Jeep recovery equipment, and there are chances you will scratch your Jeep hood paint when removing the Hi-Lift Jack mounted on your Jeep hood, we do recommend laying down something like a towel under the Hi-Lift Jack mounted on your Jeep hood to protect your Jeeps paint when removing the Hi-Lift Jack.

For us, it was easy to install and remove the Hi-Lift Jack with two people without risking denting and damaging the paint on our Jeep.

Talking of protection, we did not notice any rattling or noises coming from the Hi-Lift Jack mounted on the hood of our Jeep with the Hi-Lift Jack HM-900 Hood Mount, this doesn’t mean that you will not need to secure the Hi-Lift Jack to prevent it from vibration that might cause the Hi-Lift Jack from detaching from your Jeep, this is why we do recommend adding the Hi-Lift Jack HK-B Black Handle-Keeper to protect the Hi-Lift Jack from rattling and moving around, especially when off-roading in uneven terrain or driving at high speeds.

Best Hi-Lift Jack Handle Keeper

Lastly, you will need to cover the Hi-Lift Jack base with a protective cover, this is because mounting a Hi-Lift Jack on the hood of your Jeep will expose the Hi-Lift Jack to weather and other elements that might lead to rust and corrosion, the Jeep hood is one the most exposed Hi-Lift Jack mounting options that will expose your Hi-Lift Jack to corrosive elements.

One of the best Hi-Lift Jeep covers that we do recommend is the Running Gear Jack Cover it is made from Vinyl and Carbon fiber that protects your Hi-Lift Jack from UV rays, mold, and mildew and will fit most Hi-Lift Jacks.

Best Hi-Lift Jack Cover

Hi-Lift Jack HM-900 Hood Mount Installations Tips.

• The Hi-Lift Jack HM-900 Hood Mount includes four rubber pads that should be fitted between the hood of your Jeep and the Hi-Lift mount brackets, they are meant to protect your Jeep hood paint from rust and corrosion when installing and after installing your Hi-Lift Jack mount on your Jeep.
• We do recommend installing one part of the Hi-Lift Jack HM-900 Hood Mount completely before installing the second mounting brackets, it’s easier to align the brackets after installing one bracket than installing both brackets at the same time.

Hi-Lift Jack 4X400 4XRAC Jack Mounting System Review

If you want to mount your Hi-Lift Jack in the front or rear bumper of your Jeep, the Hi-Lift Jack 4X400 4XRAC Jack Mounting System is the perfect Jeep high lift Jack mount for you, not only does the Hi-Lift Jack 4X400 4XRAC Jack Mounting System be used on the front and rear bumper of your Jeep you can also use it to mount a Hi-Lift Jack on the doors of your Jeep, making it a versatile Hi-Lift Jack mount.

Best Front and Rear Bumper Hi-Lift Jack Mount For Jeep

The front and rear bumpers are the external parts of your Jeep that are easy to access, if you mount your Hi-Lift Jack on the bumper it will be easy to access, the bumper is also the lowest part of your Jeep and this means that the weight and center of gravity will be low, this means that the stability of the Hi-Lift Jack will be improved and this will prevent the Hi-Lift Jack from tipping over compared to Hi-Lift Jacks mounted on the roof rack.

The two mounting brackets and the two mounting bracket caps have long slots that make them easy to adjust when installing on your Jeep front or rear bumper mounting slots, the brackets are made from 1/8 inches alloy steel that is strong and durable, depending on the mounting slots of your front and rear Jeep bumper the brackets can be mounted at any distance apart as long as they each line up.

Regarding the security of the Hi-Lift Jack 4X400 4XRAC Jack Mounting System, it comes with a thru-hole in the carriage bolts that will allow you to secure your Hi-Lift Jack with a padlock, however, we would advocate investing in a Bolt padlock for Jeep because finding a locking mechanism for the ¼ inch bolt is not easy, and none is included in the kit to secure your Hi-Lift Jack from theft.

Best Hi-Lift Jack Locking Padlock

What we loved about the Hi-Lift Jack 4X400 4XRAC Jack Mounting System is that the Hi-Lift Jack mounting system for Jeep can be used to mount a Hi-Lift Jack on your Jeep door hinges, and truck bed of your Jeep gladiator, making it one of the most versatile Jeep Hi-Lift mounting solution.

There is minimum vibration after mounting a Hi-Lift Jack on the bumpers of your Jeep, this is because the vibration is distributed to the bumpers and the Jeep frame making the Hi-Lift Jack secure, however, to make sure the Hi-Lift Jack doesn’t detach or cause unnecessary rattling when mounted on your Jeep we do recommend using a Hi-Lift Jack handle keeper. We used the Hi-Lift Jack HK-B Black Handle-Keeper alongside the Velcro strap that comes with the mounting brackets to secure our Hi-Lift Jack 4X400 4XRAC Jack Mounting System mounted Hi-Lift Jack on our Jeep.

Best Hi-Lift Jack Handle Keeper

Now, mounting a Hi-Lift Jack too low to the ground on your Jeep bumpers will expose the Hi-Lift Jack to elements such as obstacles you will meet on the trails including branches, mud, debris, and additionally weather elements which might cause corrosion and resistance to your Hi-Lift Jack, that’s why we would recommend investing in a Running Gear Hi-Lift Jack Cover

Best Hi-Lift Jack Cover

Hi-Lift Jack 4X400 4XRAC Jack Mounting System Installation Tips.

• The carriage bolts that hold the Hi-Lift Jack on the Hi-Lift Jack 4X400 4XRAC Jack Mounting System are not fixed or welded with the mounting brackets, this makes it hard to align the Hi-Lift Jack in place, and also installing the Hi-lift Jack, means you will have difficulty mounting the Hi-Lift Jack to carriage bolts since you need to securely hold the two together, for this reason, you will need another person to hold the Hi-Lift Jack as you tighten the carriage bolts.
• You might need to drill holes in your Jeep front or rear bumper if they don’t have mounting slots in them, for this reason, we advise you before purchasing the Hi-Lift Jack 4X400 4XRAC Jack Mounting System installation tips.
• Make sure your front or rear bumper has mounting slots that are 6 3/4 inches long, 2 and ½ inches wide, and 3 and ½ inches high if you don’t want to start drilling holes in your Jeep bumpers, for truck beds you will have to drill holes in them, make sure to use rubbers washers and rust prevention spray to prevent your drilled holes from water leaks and rusting and spreading rust to the rest of the body.

Rugged Ridge Jack Mounting Bracket Review

The Rugged Ridge Jack Mounting Bracket is one of the safest ways to mount a Hi-Lift Jack on your Jeep, this is because it mounts on the tailgate of your Jeep making it secure and preventing the Hi-Lift Jack from becoming a hazard after accidental detachment from the mounting brackets, unlike the hood mount which is hazardous in that after accidental detachment the Hi-Lift Jack will come straight to you and the windshield.

The Rugged Ridge Jack Mounting Bracket doesn’t also block your views unlike the hood-mounted Hi-Lift Jack mount, that’s why this Jack is one of the most sought Hi-Lift Jack mounting solutions for Jeep off-roaders, Overlanders, and Campers.

Best Hi-Lift Jack Tailgate Mount For Jeep

Another added benefit of mounting a Hi-Lift Jack on a Jeep with the Rugged Ridge Jack Mounting Bracket is that you don’t have to worry about denting your Jeep or damaging your paint when installing or removing your Hi-Lift Jack, this is because the Hi-Lift Jack is easily accessible and easy to remove from the back of your Jeep.

The Rugged Ridge Jack Mounting Bracket will mount the Hi-Lift Jack by holding in place the base on the Hi-Lift Jack and securing it in place with the two knobs provided, on the upper side of the mounting brackets, there are two holes one is for the security know and the other can be used to secure the Hi-Lift Jack with a personal padlock (not included).

The base of the Hi-Lift Jack is the heaviest part of a Hi-Lift Jack, the Rugged Ridge Jack Mounting Bracket makes sure it secures the heaviest part and distributes the weight to the body of the Jeep, as the Hi-Lift Jack holds straight, we don’t recommend using a Hi-Lift Jack which is more than 60 inches as this might be too heavy and might slant the brackets which might not be suitable for heavy Hi-Lift Jacks, especially without securing and supporting the Hi-Lift Jack from the top side.

The Running Gear Hi-Lift Jack Cover is compatible with the Rugged Ridge Jack Mounting Bracket and we would recommend it to protect your Hi-Lift Jack from weather elements and off-road elements such as dust, mud, water, and debris especially when the Hi-Lift Jack is mounted on the rear of your Jeep.

Best Hi-Lift Jack Cover

One of the disadvantages of mounting a Hi-Lift Jack with the Rugged Ridge Jack Mounting Bracket is that the Hi-Lift Jack will stick out on the top of your Jeep, this will lead to brushes with obstacles such as branches, especially to Jeep overlanders and campers whose trails have tree brunches hanging on the roads. Constant brushes with obstacles might weaken the brackets over time, and one day will result in your losing your Hi-Lift Jack.

Another disadvantage of the Rugged Ridge Jack Mounting Bracket is that you should be aware of the tire size you will use on the tailgate of your Jeep with the Rugged Ridge Jack Mounting Bracket and a Hi-Lift Jack mounted on it, we easily installed 35 inches tires on the tire carrier with no issues, however 37 inches tires we a problem and required modifications to fit them with the Rugged Ridge Jack Mounting Bracket mounted on the hinges of the Jeeps tailgate.

Hi-Lift Jack TM-700/750 Adjustable Tube Mount Review.

There are two versions of the Hi-Lift Jack tube mount available for your Jeep, a steel Hi-Lift Jack TM-700 Adjustable Tube Mount, we don’t recommend this as it is more susceptible to rust and corrosion, if you will mount it on the exterior of your Jeep due to being exposed to weather and off-road elements, however, it’s the cheaper version and we would recommend it if you intend to mount a Hi-Lift Jeep Jack in the interior of your Jeep.

Best Steel Hi-Lift Jack Mount For Your Jeep Roll Cage & Bull Bar

The Hi-Lift Jack TM-750 is an aluminum Hi-Lift Tube Mount that is more resistant to corrosion and rust, we do recommend using the Hi-Lift Jack TM-750 Adjustable Tube Mount if you intend to mount a Hi-Lift Jack on your bull bar or the external mounting points on your Jeep.

Best Aluminium Hi-Lift Jack Mount For Your Jeep Roll Cage & Bull Bar

There are two versions of the tube mount available on both Hi-Lift Jacks 1-2 inches and 2-3 inches depending on where you want to mount your Hi-Lift Jack, if you intend to mount the Hi-Lift Jack on the roof rack of your Jeep we would recommend the 1-2 inches, Hi-Lift Jack, however, the cage roll bars measures 2.25″ for the cage and 2.75″ with the padding this means you will need the 2-3 version Hi-Lift Jack tube mount if you need to mount the Hi-Lift Jack on your Jeep roll bars.

To secure the Hi-Lift Jeep Jack you will need to purchase a Hi-Lift Jack hood mount locking knob that will replace the plastic knobs that comes with the Hi-Lift Jack TM-700/750 Adjustable Tube Mount.

We recommend the Hi-Lift VERS-LK Versatile Locking Knob than using a padlock or a bike chain because over time the locks get contaminated with water and grim and they get difficult to unlock, Hi-Lift VERS-LK Versatile Locking Knob has a latch that closes after removing the key and it’s made to withstand the harsh off-roading environment that we frequent with our Jeeps compared to other Hi-Lift locking mechanisms.

Best Hi-Lift Jack Hood Mount Locking Knob

You will also need a Hi-Lift Jack HK-B Black Handle-Keeper that will secure your Hi-Lift Jack mounted on Jeep tubes to prevent unnecessary movement and rattling when driving, a Hi-Lift handle keeper will help secure the Hi-Lift in place since the roll bar is circular and might cause the mounting brackets to tilt if they are not secured properly.

Best Hi-Lift Jack Handle Keeper

Another accessory that you will need for mounting a Hi-Lift Jack on a Jeep roll bar or bull bar is a Running Gear Jack Cover that will protect the base of the Hi-Lift Jack from weather and off-road elements especially if you intend to mount the Hi-Lift Jack on the exterior of your Jeep.

Best Hi-Lift Jack Cover

Running Gear Jack Cover is made with Marine Grade Vinyl that will protect your Jack from weather and environmental elements, it will also ensure the Hi-Lift Jack is always clean and the oils used to maintain the Hi-Lift Jack are always free from elements contamination, ensuring the Hi-Lift Jack is always in good working condition, protected and easier to handle and use during when needed during recovery operations.

Hi-Lift Jack TM-700/750 Adjustable Tube Mount Installation Tips.

• We would recommend using some type of rubber pads between the mounting brackets and the tube whether you are using the roll bars or the bull bars, this will prevent scuffing and scratches to the tube and also help secure the Hi-Lift mounting system to the body of the Jeep.
• If you are mounting the Hi-Lift Jack on your bull bar, its important to make sure the Hi-Lift Jack is not obstructing the headlights or off-road lights mounted on your Jeep, if you are mounting it inside of your Jeep roll bars, it’s important to place the Hi-Lift Jack in a place that you can safely remove the Hi-Lift Jack without removing the oft tops or the hard tops making it easier to remove the Hi-Lift Jack without having to remove the Jeep tops.

Bolt Hi-Lift Jack Mount Review.

The Bolt Hi-Lift Jack Mount is designed to be fitted on your Jeep Wrangler (1997 to current Jeep Wrangler) doors, especially the driver’s right side of the door, it’s very easy to install without the need of drilling holes on the door or the frame of the door.

Best driver-side Hi-Lift Jack Mount For Jeep

The reason we do recommend the Bolt Hi-Lift Jack Mount is that it allows you to mount your Hi-Lift Jack on the doors, a position that is easier to access during an emergency, and also is very easy to install since there is no drilling involved and you can use the already existing holes, the Jack also comes with a lock that can be opened with your existing Jeep keys, and the lock has a locking shutter that prevents water and other elements from damaging the locking mechanism of the lock.

We used the Hi-Lift Jack JP-350 Jack Protector to protect the Hi-Lift Jack after mounting it to the door of our Jeep instead of only protecting the base of the Hi-Lift Jack.

Best Hi-Lift Jack Cover

Conclusions.

In conclusion, mounting a Hi-Lift Jack on your Jeep is a crucial aspect of off-roading preparedness, and this guide has provided comprehensive insights into the process. From exploring various mounting options to highlighting the best Hi-Lift Jack mounts available, we’ve aimed to equip you with the necessary knowledge to make an informed decision.

By considering factors such as secure mounting, durability, ease of access, and installation, you can ensure that your Hi-Lift Jack is not only securely attached to your Jeep but also readily available when needed most. Additionally, we’ve recommended essential accessories like locking knobs, handle keepers, and protective covers to enhance the functionality and longevity of your setup.

Whether you opt for a hood mount, bumper mount, tailgate mount, or tube mount, each option offers its unique benefits and considerations. The choice depends on your preferences, Jeep model, and intended usage. However, regardless of the mounting location, prioritizing safety, security, and ease of use will undoubtedly improve your off-roading experiences and overall peace of mind.

As you prepare for your next Jeep adventure, may this guide serve as a valuable resource in maximizing the utility of your Hi-Lift Jack while exploring the great outdoors with your Jeep. Remember to always prioritize safety and responsible off-roading practices, and enjoy the thrill of conquering new terrains with confidence.

Last update on 2024-07-14 / Affiliate links / Images from Amazon Product Advertising API